사용 설명서 필립스 HD9384 주전자

사용 설명서

ENGLISH

Introduction

Congratulations on your purchase and welcome to Philips! To fully benet

from the support that Philips offers, register your product at www.philips.

com/welcome.

General description (Fig. 1)

1 Lid

2 Spout

3 Water level indicator

4 Lid release button

5 Base

6 Base connector

7 Cord storage facility

8 Mains plug

9 Black tea button

10 Green tea button

11 Herbal/fruit tea button

12 Instant coffee button

13 40ºC button

14 KEEP WARM button

15 Instant soup/hot chocolate button

16 Personal setting button

17 Rooibos tea button

18 Arrow buttons

19 Calc light

20 Display

Important

Read this user manual carefully before you use the appliance and save it for

future reference.

Danger

- Do not immerse the kettle or the base in water or any other liquid.

Warning

- Check if the voltage indicated on the appliance corresponds to the local

mains voltage before you connect the appliance.

- Do not use the appliance if the plug, the mains cord, the base or the

appliance itself is damaged.

- If the mains cord is damaged, you must have it replaced by Philips, a

service centre authorised by Philips or similarly qualied persons in

order to avoid a hazard.

- This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for

their safety.

- Children should be supervised to ensure that they do not play with the

appliance.

- Keep the mains cord out of the reach of children. Do not let the

mains cord hang over the edge of the table or worktop on which the

appliance stands. Excess cord can be stored in or around the base of

the appliance.

- Do not place the appliance on an enclosed surface (e.g. a serving tray),

as this could cause water to accumulate under the appliance, resulting in

a hazardous situation.

- Hot water can cause serious burns. Be careful when the kettle contains

hot water.

- Do not touch the body of the kettle during and some time after use, as

it gets very hot. Always lift the kettle by its handle.

- Never ll the kettle beyond the maximum level indication. If the kettle

has been overlled, boiling water may be ejected from the spout and

cause scalding.

- Do not remove the lid while the water is heating up. Be careful when

you remove the lid immediately after the water has boiled: the steam

that comes out of the kettle is very hot.

- Only use the kettle in combination with its original base.

Caution

- Only connect the appliance to an earthed wall socket.

- Always place the base and the kettle on a dry, at and stable surface.

- The kettle is only intended for heating up and boiling water. Do not use

it to heat up soup or other liquids or jarred, bottled or tinned food.

- When you select a temperature below 100ºC, the water is not boiled

(sterilised) rst, but is heated up directly to the temperature of the

selected preset button.

- Always make sure you ll the kettle at least up to the 1-cup indication

(0.25l) to prevent the kettle from boiling dry.

- Depending on the hardness of the water in your area, small spots or

stains may appear on the heating element of your kettle when you

use it. This phenomenon is the result of scale build-up on the heating

element and on the inside of the kettle over time. The harder the water,

the faster scale builds up. Scale can occur in different colours. Although

scale is harmless, too much scale can inuence the performance and

durability of your kettle. Descale your kettle regularly by following the

instructions given in chapter ‘Cleaning and descaling’.

- Some condensation may appear on the base of the kettle. This is

perfectly normal and does not mean that the kettle has any defects.

- This appliance is intended to be used in household and similar

applications such as:

1 staff kitchen areas in shops, ofces and other working environments;

2 farm houses;

3 by clients in hotels, motels and other residential type environments;

4 bed and breakfast type environments.

Boil-dry protection

This kettle is equipped with boil-dry protection. The boil-dry

protection automatically switches off the kettle if it is accidentally switched

on when there is no water or not enough water in it. Fill the kettle with

approx. 1 litre of water. Leave the kettle off the base for 1 minute and then

place it on the base. The kettle is now ready for use again.

Electromagnetic elds (EMF)

This Philips appliance complies with all standards regarding electromagnetic

elds (EMF). If handled properly and according to the instructions in this

user manual, the appliance is safe to use based on scientic evidence

available today.

Before first use

1 Remove stickers, if any, from the base or the kettle.

2 Placethebaseonadry,stableandatsurface.

3 To adjust the length of the cord, wind part of it around the cord

storage facility in the bottom of the base (Fig. 2).

4 Rinse the kettle with water.

5 Fill the kettle with water up to the MAX indication and let the water

boil once (see chapter ‘Using the appliance’).

6 Pour out the hot water and rinse the kettle once more.

Changing the frequency of the descaling reminder

The calc light lights up after a xed amount of usages, based on average

water hardness. You can change this frequency by setting a lower or higher

water hardness or you can completely switch off the descaling reminder.

1 Press the herbal tea/fruit tea button and the personal setting button

at the same time. (Fig. 3)

, Both buttons and the display light up. The display shows A, for

average (Fig. 4).

2 Use the arrow buttons to adjust the water hardness (Fig. 5).

You can adjust the hardness to H, for high, or L for low.

3 Press the herbal tea/fruit tea button and the personal setting button

atthesametimeagaintoconrmthenewsetting.

Note: If you do not conrm the new setting, the change is not stored.

Switching off the descaling reminder

Follow the steps in section ‘Changing the frequency of the descaling

reminder’ and select - to switch off the descaling reminder.

Using the appliance

1 Press the lid release button (1). The lid opens automatically (2) (Fig. 6).

2 Fill the kettle with the desired amount of water (Fig. 7).

Note: You can also ll the kettle through the spout.

3 Close the lid (Fig. 8).

4 Place the kettle on its base and put the plug in the wall socket (Fig. 9).

The appliance is now ready for use.

Heating up water with preset buttons

Different hot drinks require different temperatures to taste their best. With

the preset buttons on the base, you can choose the right temperature for

your favourite hot drink.

To make sure the appliance accurately* heats up the water to the set

temperature, ll the kettle with at least 0.25l water.

* This kettle has been designed to achieve maximum temperature accuracy.

However, the actual temperature of the water may deviate slightly from the

indicated temperature.

등급

이 설명서에 대한 추가 정보

필립스 HD9384 주전자에 대한 종이 설명서가 있으면 좋다고 생각합니다. 언제든지 당사 웹사이트에서 설명서를 다운로드하여 직접 인쇄하실 수 있습니다. 원본 설명서를 원하시면 Philips에 문의하시기 바랍니다. 원본 매뉴얼을 제공할 수도 있습니다. 다른 언어로 된 필립스 HD9384 주전자 설명서를 찾고 계십니까? 홈페이지에서 원하는 언어를 선택하고 모델 번호를 검색하여 사용 가능한지 확인하세요.

명세서

필립스 주전자에 대한 모든 매뉴얼
주전자의 추가 매뉴얼

필립스 HD9384 주전자에 대해 자주 묻는 질문

저희 지원 팀은 자주 묻는 질문에 대한 유용한 제품 정보 및 답변을 찾고 있습니다. 자주 묻는 질문에 오류를 발견하신다면, 연락 양식에 따라 알려주시기 바랍니다.

관련 상품

사용 설명서

필립스 HD4637 Cucina 주전자

사용 설명서

필립스 HD4674 Cucina 주전자

사용 설명서

필립스 HD4659 Essence 주전자

사용 설명서

필립스 HD4686 Pure Essentials Collection 주전자

사용 설명서

필립스 HD4685 Pure Essentials Collection 주전자

사용 설명서

필립스 HD4690 Aluminium Collection 주전자

사용 설명서

필립스 HD9340 주전자

사용 설명서

필립스 HD4638 주전자

관련 카테고리