사용 설명서 필립스 GC1680 Comfort LongLife 다리미

사용 설명서

Comfort LongLife GC1630, GC1620, GC1615ENGLISH2

4239 000 57961

General description

.

A Spray nozzle

B Filling opening

C Spray button T

D Steam control

- O = no steam

- q = moderate steam

- w = maximum steam

- x = Calc-Clean function

E Extra-steam function (GC1630/GC1620)

F Electronic safety shut-off function (GC1630 only)

G Temperature dial

H Temperature light

I Mains cord

J Type plate

K Anti-calc tablet

L Water tank

Important

.

Read these instructions for use carefully before using the appliance and save

them for future reference.

◗ Check if the voltage indicated on the type plate corresponds to the

local mains voltage before you connect the appliance.

◗ Do not use the appliance if the plug, the cord or the appliance itself is

damaged.

◗ If the mains cord is damaged, it must be replaced by Philips, a service

centre authorised by Philips or similarly qualified persons in order to

avoid a hazard.

◗ Never leave the iron unattended when it is connected to the mains.

◗ Never immerse the iron in water.

◗ Infirm persons should not be allowed to use the appliance without

supervision. Keep the appliance out of the reach of children.

◗ Do not put perfume, vinegar, starch, descaling agents, ironing aids or

other chemicals in the water tank.

◗ The soleplate of the iron can become extremely hot and may cause

burns if touched. Do not allow the cord to come into contact with

the soleplate when it is hot.

◗ When you have finished ironing, when you clean the appliance, when

you fill or empty the water tank and also when you leave the iron

even for a short while: set the steam control to position 0, put the

iron on its heel and remove the mains plug from the wall socket.

Before first use

.

1 Remove any sticker or protective foil from the soleplate.

2 Let the iron heat up to maximum temperature and pass the iron over

a piece of damp cloth for several minutes to remove any residues

from the soleplate.

B

The iron may give off some smoke when you use it for the first time. This will

cease after a short while.

Preparing for use

.

Filling the water tank

Never immerse the iron in water.

1 Make sure the appliance is unplugged.

2 Set the steam control to position O (= no steam) (fig. 1).

3 Tilt the iron backwards.

4 Fill the water tank with tap water up to the maximum level (fig. 2).

Do not fill the tank beyond the MAX indication.

◗ If the tap water in your area is very hard, we advise you to mix it with

an equal amount of distilled water or to use distilled water only.

Do not put perfume, vinegar, starch, descaling agents, ironing additives,

chemically descaled water or other chemicals in the water tank.

Setting the temperature

1 Put the iron on its heel.

2 Set the required ironing temperature by turning the temperature dial

to the appropriate position (fig. 3).

Check the laundry care label for the required ironing temperature:

- 1 Synthetic fabrics (e.g. acrylic, nylon, polyamide, polyester)

- 1 Silk

- 2 Wool

- 3Cotton, linen

If you do not know what kind(s) of fabric(s) an article is made of, determine

the right ironing temperature by ironing a part that will not be visible when

you wear or use the article.

Silk, woollen and synthetic materials: iron the reverse side of the fabric to

prevent shiny patches. Avoid using the spray function to prevent stains.

Start ironing the articles that require the lowest ironing temperature, such

as those made of synthetic fibres.

3 Put the mains plug in an earthed wall socket.

4 When the temperature light has gone out, wait a while before you

start ironing (fig. 4).

The temperature light will go on from time to time during ironing.

Using the appliance

.

Steam ironing

1 Make sure that there is enough water in the water tank.

2 Select the recommended ironing temperature (see chapter 'Preparing

for use', section 'Setting the temperature').

3 After the temperature light has gone out, set the steam control to the

appropriate steam position. Make sure that the steam setting you

select is suitable for the ironing temperature selected: (fig. 5).

- q for moderate steam (temperature settings 2 to MAX)

- w for maximum steam (temperature settings 3 to MAX)

B

The iron will start steaming as soon as the set temperature has been

reached.

Ironing without steam

1 Set the steam control to position O (= no steam).

2 Select the recommended ironing temperature (see chapter 'Preparing

for use', section 'Setting the temperature').

Features

.

Spray function

You can use the spray function to remove stubborn creases at any

temperature.

1 Make sure that there is enough water in the water tank.

2 Press the spray button several times to moisten the article to be

ironed (fig. 6).

Extra steam (GC1630/GC1620)

This function provides extra steam to remove very stubborn creases.

◗ The extra-steam function only works at temperature settings

between 3 and MAX.

1 Set the steam control to position w (= maximum steam) (fig. 7).

2 Press and hold the steam control for a maximum of 5 seconds (fig. 8).

3 Release the steam control and wait at least 1 minute before using this

function again to prevent water from dripping out of the soleplate.

Electronic safety shut-off function (GC1630 only)

The electronic safety shut-off function automatically switches off the iron if it

has not been moved for a while.

◗ The auto-off light starts blinking to indicate that the iron has been

switched off by the safety shut-off function (fig. 9).

- In horizontal position, this will happen after 30 seconds.

- In vertical position, this will happen after 8 minutes.

◗ To let the iron heat up again:

- Pick up the iron or move it slightly.

- The auto-off light goes out and the temperature light goes on.

- When the temperature light has gone out and goes on again, the iron is

ready for use.

등급

이 설명서에 대한 추가 정보

필립스 GC1680 Comfort LongLife 다리미에 대한 종이 설명서가 있으면 좋다고 생각합니다. 언제든지 당사 웹사이트에서 설명서를 다운로드하여 직접 인쇄하실 수 있습니다. 원본 설명서를 원하시면 Philips에 문의하시기 바랍니다. 원본 매뉴얼을 제공할 수도 있습니다. 다른 언어로 된 필립스 GC1680 Comfort LongLife 다리미 설명서를 찾고 계십니까? 홈페이지에서 원하는 언어를 선택하고 모델 번호를 검색하여 사용 가능한지 확인하세요.

명세서

필립스 다리미에 대한 모든 매뉴얼
다리미의 추가 매뉴얼

필립스 GC1680 Comfort LongLife 다리미에 대해 자주 묻는 질문

저희 지원 팀은 자주 묻는 질문에 대한 유용한 제품 정보 및 답변을 찾고 있습니다. 자주 묻는 질문에 오류를 발견하신다면, 연락 양식에 따라 알려주시기 바랍니다.

관련 상품

사용 설명서

필립스 GC7420 다리미

사용 설명서

필립스 GC6433 다리미

사용 설명서

필립스 GC9415 다리미

사용 설명서

필립스 GC9625 다리미

사용 설명서

필립스 GC8638 다리미

사용 설명서

필립스 GC9315 다리미

사용 설명서

필립스 DST1030 다리미

사용 설명서

필립스 GC8721 다리미

관련 카테고리