사용 설명서 마끼다 CJ106D 재킷

사용 설명서

9 ENGLISH

PARTS DESCRIPTION

Battery holder (optional accessory)

► Fig.1

1 Battery holder (10.8 V -

12 V max)

2 Battery holder (14.4 V /

18 V)

3 Belt hook 4 Strap hole

Model CJ105D / DCJ205

► Fig.2

1 Power button 2 Battery pocket 3 Jack 4 Code lock

Model CJ106D / DCJ206

► Fig.3

1 Power button 2 Battery pocket 3 Jack 4 Code lock

5 Hood 6 Name tag holder - - - -

Model CV102D / DCV202

► Fig.4

1 Power button 2 Battery pocket 3 Jack

INSTALLATION

Installing or removing the battery

cartridge

CAUTION: Always switch off the device

before installing or removing the battery

cartridge.

CAUTION: Hold the battery holder and the

battery cartridge rmly when installing or remov-

ing the battery cartridge. Failure to hold the battery

holder and the battery cartridge rmly may cause

them to slip out of your hands and result in damage

to the battery holder and battery cartridge and/or a

personal injury.

► Fig.5: 1. Red indicator 2. Button 3. Battery cartridge

4. Battery holder (optional accessory)

To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Insert the battery cartridge all the way until

it locks in place with a small click. If you can see the red

indicator on the upper side of the button, it is not locked

completely.

To remove the battery cartridge, slide it from the battery

holder while pressing the button on the front of the

cartridge.

CAUTION: Always install the battery car-

tridge fully until the red indicator cannot be seen.

Otherwise the battery cartridge may accidentally

fall out of the battery holder, causing injury to you or

someone around you.

CAUTION: Do not forcibly install the battery

cartridge. If the battery cartridge does not slide in

easily, it is not being inserted correctly.

Battery pocket

The battery holder (with battery cartridge) can be stored

in the battery pocket. Connect the power cable jack

pulled out of the battery pocket to the battery holder

plug. Then put the battery holder into the battery pocket

and fasten the fastener.

► Fig.6: 1. Power cable 2. Jack 3. Plug 4. Battery

pocket

The belt hook on the battery holder can be detached by

removing the screws.

► Fig.7: 1. Screw 2. Belt hook

Attaching the battery holder

You can hang the battery holder on your waist belt.

To prevent the battery holder from dropping acciden-

tally, attach a strap using the strap hole and secure it.

1. Pull the power cable out of the upper hole in the

battery pocket and feed the jack through the lower hole

in the battery pocket and pull it through to the inside of

the jacket or vest.

► Fig.8: 1. Power cable 2. Upper hole 3. Battery

pocket 4. Jack 5. Lower hole

2. Attach the belt hook of the battery holder to your

waist belt, and connect the jack to the battery holder

plug.

► Fig.9: 1. Belt hook 2. Battery holder 3. Waist belt

4. Plug 5. Jack

The battery holder has an anti-drop function. When

removing the battery holder from the belt, pull up the

battery holder while pressing the unlock button.

► Fig.10: 1. Unlock button

등급

이 설명서에 대한 추가 정보

마끼다 CJ106D 재킷에 대한 종이 설명서가 있으면 좋다고 생각합니다. 언제든지 당사 웹사이트에서 설명서를 다운로드하여 직접 인쇄하실 수 있습니다. 원본 설명서를 원하시면 Makita에 문의하시기 바랍니다. 원본 매뉴얼을 제공할 수도 있습니다. 다른 언어로 된 마끼다 CJ106D 재킷 설명서를 찾고 계십니까? 홈페이지에서 원하는 언어를 선택하고 모델 번호를 검색하여 사용 가능한지 확인하세요.

명세서

마끼다 재킷에 대한 모든 매뉴얼
재킷의 추가 매뉴얼

관련 상품

사용 설명서

마끼다 CJ105D 재킷

사용 설명서

마끼다 DCJ206 재킷

사용 설명서

마끼다 DCV202 재킷

사용 설명서

마끼다 CV102D 재킷

사용 설명서

마끼다 DCJ205 재킷