사용 설명서 Led Lenser H7.2 손전등

사용 설명서

02

English | Page 02-04

GB

We are delighted that you have purchased one

of our products.

These are usage instructions to help you

familiarize yourself with your new purchase.

All the documents accompanying the product

must be read attentively before using the

product, stored for future use and if the product

is transferred to a third party, the documents

should be handed over as well. This ensures

that maximum benefit is drawn from the product

and questions from users can be resolved when

they arise.

Above all, comply with the warnings and safety

instructions and dispose of the packaging

material properly.

Additional information for H7.2 with “TEST IT”

function

Your LED LENSER H7.2 headlamp is packaged

with a “TEST IT” function (item no. 7397). This

allows users to test the brightness while the

product is still in the package. For testing,

simply push the yellow “TEST IT” button on the

front of the package. When testing, please do

not look directly into the light.

The “TEST IT” button is connected to the battery

housing of the H7.2 via two wires and should be

removed prior to use.

To remove the “TEST IT” button and wires, open

the battery box and to separate the two “TEST

IT” button wires from the battery housing by

pulling on each wire until it releases from the

battery housing. Close the battery box. Please

dispose and recycle the packaging and “TEST

IT” button with the wires according to the local

regulations.

Product

7297, LED LENSER® H7.2 (gift box)

7397, LED LENSER® H7.2 (Blister with “TEST IT”

function)

Version of the operating manual: V 1.4

1. Battery set:

4 x AAA / LR03 (1.5 V DC)

2. Turning it ON and OFF

There are two switches on the H7.2. The “front

switch” is located in the upper part of the

headlamp housing. This button is used to turn

the H7.2 ON/OFF. It is also used to activate the

various Light Programs, “Lighting Functions”

(see section 5) and to active the “Transport

Lock” functions (see section 6).

The “Multi-function Wheel” switch is located

on the backside in the upper part of the battery

box. This allows you to adjust the brightness

and flash rate infinitely and to change the “Light

modes Programs” (see section 5)

3. Focus

In the front, narrower region of the headlamp

housing is the reflector lens through which the

light of the LED is focusable. The reflector lens

is held by a plastic ring. You can rotate that

plastic ring using two fingers, and thus adjust

the focus quickly and easily. Which is allows the

adjustment of the light beam’s focus.

You also can adjust the hinge of the headlamp,

depending on whether you want to illuminate

an area in the distance or in front of you. For

this, you simply tilt the part of the head lamp

containing the reflector lens and the LED.

4. Smart Light Technology (SLT)

Smart Light Technology (SLT) is a program that

consists of computer optimized microcontrollers

which allows our products to have various

lighting functions. The H7.2 is equipped with

this technology and is therefore able to use

various Light Programs and Functions (see

Section 5) with an interface that is simple and

user friendly. By pressing the front switch on

the lamp head you can activate the following

“Light functions”: On (“Power”) – Off, “Low

Power”, “Boost”, “Dim” and “Signal”. With the

“Multi Function Wheel” switch on the back, the

light intensity “Dim” function and flashing rate

“Signal function” is infinitely adjustable by easily

rotating the switch.

5. Light Programs and Light Functions

The H7.2 is equipped with one LED (Light

Emitting Diode).

By selecting one of the three "Light programs"

(1. "Easy Low", 2. "Easy Power" or 3. "Signal")

and one of the "Light functions", there are three

sub-mode under each “light programs (“strong

light”, “dim light” or 12Hz “signal”), The default

mode is mode one “Easy Low”.

Light function - Boost mode (Brightest light

intensity): in any state, push the front switch

for 3 seconds to achieve boost mode. After 30

seconds the flashlight will return to the previous

setting.

Release the switch when the boosted light is

on, otherwise the product will enter “Transport

Lock” (see Section 6).

5.1 Light Programs

Below function only can active when the product

is not connected with adaptor and the transport

lock function is deactivated.

To switch between the three "Light programs",

you have to press the "Multi Function Wheel"

switch (rotary switch) on the back of the battery

box for at least 5 seconds. A correct activation

confirms the lamp with a corresponding number

of flashes (1 x, 2 x or 3 x). Immediately after the

setting of the chosen "Light program", the lamp

is switched on.

a) Light Program one – “Easy Low”: The LED

will blink once by 3Hz and then go to “dim”

function to indicate that it is sub-mode one, In

this mode, the lamp starts with the “Low Power”

function (dimmed light) by pressing the front

switch once. Press the front switch twice within

1 second to turn on the “Power” function (full

light). Another press will turn off the lamp.

b) Light Program two - Easy power: The LED

will blink twice by 3Hz and then go to “strong

light” function to indicate that it is sub-mode

two, In this mode, the lamp starts with the

“Power” function (full light) by pressing the front

switch once. Press the front switch twice within

1 second to turn on the “Low Power” function

(dimmed light). Another press will turn off the

lamp.

c) Light Program three – Signal Mode: The LED

will blink 3 times and then go to “strong light”

function to indicate that it is sub-mode three,

“Signal Mode”. In this Program the lamp starts

with the “Power- function” (full light) by pressing

the front switch once. Press the front switch

등급

이 설명서에 대한 추가 정보

Led Lenser H7.2 손전등에 대한 종이 설명서가 있으면 좋다고 생각합니다. 언제든지 당사 웹사이트에서 설명서를 다운로드하여 직접 인쇄하실 수 있습니다. 원본 설명서를 원하시면 Led Lenser에 문의하시기 바랍니다. 원본 매뉴얼을 제공할 수도 있습니다. 다른 언어로 된 Led Lenser H7.2 손전등 설명서를 찾고 계십니까? 홈페이지에서 원하는 언어를 선택하고 모델 번호를 검색하여 사용 가능한지 확인하세요.

명세서

Led Lenser 손전등에 대한 모든 매뉴얼
손전등의 추가 매뉴얼

Led Lenser H7.2 손전등에 대해 자주 묻는 질문

저희 지원 팀은 자주 묻는 질문에 대한 유용한 제품 정보 및 답변을 찾고 있습니다. 자주 묻는 질문에 오류를 발견하신다면, 연락 양식에 따라 알려주시기 바랍니다.

관련 상품

사용 설명서

Led Lenser M7R X 손전등

사용 설명서

Led Lenser I6E 손전등

사용 설명서

Led Lenser K1-L 손전등

사용 설명서

Led Lenser P6.2 손전등

사용 설명서

Led Lenser B2R 손전등

사용 설명서

Led Lenser iW7R 손전등

사용 설명서

Led Lenser X21.2 손전등

사용 설명서

Led Lenser H7R.2 손전등

관련 카테고리